Versatile and innovative work positioning, rope work, and fall protection harnesses. 6 attachment points that cover all the versatile use needs of areas with a risk of falling. Chest Cruiser chest lift sticker integrated into the harness, to make climbing on the rope as efficient as possible. The hip belt has attachment points in front for easy attachment of the pushchair. Integrated RFID microchip to facilitate tracking and checking. Also certified for international use.
The quick-release leg loops and the buckle on the second shoulder strap make it easier to put on and take off the harness without having to readjust it. The design of the front sleeves of the 3D shaped leg loops provides ideal comfort and freedom of movement. The wide and breathable pads on the leg loops and the wide, semi-rigid breathable hip belt provide comfort for the working day. Leg loops have elastic sections to provide the best user experience. The hip belt is supported by velcro straps on the shoulder strap, thanks to which, when carrying heavier equipment on the hip belt, the weight is distributed evenly on the shoulder straps as well. For the adjustment buckles, the webbing is protected in the most worn places, which increases the lifespan of the harness, especially in the most demanding conditions. Thanks to the ends of the belts, it is easy to handle the belt ends even with gloves on. A strap around the chest that makes the harness fit perfectly in all kinds of work situations.
With lap belt EN 358 attachment points for work positioning: One in front and two on the sides. In addition, the attachment point at the back for the access restriction rope and is clearly marked with the letter R (=Restraint). The front attachment point of the lap belt distributes the weight between the lap belt and the leg loops when working on the rope, or it can be attached to e.g. work positioning rope or descent device. Always used simultaneously with the work positioning rope, the side anchor points distribute the weight of the lap belt and improve comfort when working with the legs supported, and have two positions: Work position, where they are exposed and easily accessible, and Stand By position, where they are folded against the lap belt and out of the way , when not in use.
Attachment point of the EN 361 fall arrest system on the chest and back. The structure of both is designed so that they do not get caught in structures when moving in tight spaces.
In addition, there is an attachment point on the back of the hip belt to prevent access to the area with a risk of falling.
Clips on the shoulder straps to which you can attach the connecting rope branch fasteners (e.g. Edelrid Shockstop connecting rope branches), or other small tool or equipment. These attachment points can be removed and moved to the desired place in the harness. If a two-pronged shock absorber is dropped on the connecting rope, and one of the prongs is attached to the holder, the holder releases the fastener from jerking, and allows the connecting rope's shock absorber to function as designed. Also works for other jerks over 5 kg. Improves safety at the construction site, improves user comfort and makes working more efficient. The holders are turned 90 degrees so that the use would be meaningful. This is a great feature when work tasks include moving on ladders, scaffolding or other metal structures, or when there is a need to get work tools to an easily accessible place in a harness.
The hip belt has four shaped accessory loops for a total of 12 locking rings. Maximum weight 25 kg. In the back, there are also two places with straps for other accessories such as a first aid kit. Both leg loops have an additional place for Edelrid SM Clip tool fasteners. Holders in the shoulder straps, where you can put a radio phone or, for example, control the shock absorber of the rope grab that stops a fall appropriately. Meets the requirements of European CE EN361, EN358 and EN813 standards and additionally certified up to 150 kg (=maximum user weight with equipment) and ANSI / ASSE Z359.11-2014. Materials: Fiber parts polyester, adjustment buckles steel, attachment points aluminum alloy. Maximum lifespan 14 years (= 4 years of storage + 10 years of use).
Two sizes available: This is SM
1-size (SM): Hip belt length: 70-95 cm. User height: 165-185 cm. Weight: 2050 g.
2-size (L-XL): Hip belt length: 85-120 cm. User height: 175-200 cm. Weight: 2150 g.
Available accessories:
880630002190 Air Lounge seat-lounge chair S size
880930007490 Air Lounge seat-lounge chair L size
Numerous different Edelrid tool bags, tool holders, tool belts and first aid kits
