HY-LAND P7S (=P7S and SWING MODULE)
Hy-Land is a solid play stand for public use (standard EN1176), but it is equally suitable for private use as well. In addition to safety, versatility has also been taken into account in the design. Of course, all play towers have a slide and a sandbox formed by a plinth at ground level, and in addition, this Swing Module model also has a swing stand connected to the play tower. At its best, the play tower largely also serves as a playhouse. When several functions are combined in one and the same entity, the area reserved for playing in the yard can be used optimally and cheaply.
Hy-Land is the right product when the play stand is placed in a school, kindergarten, housing association, camping ground, beach, municipal park, gas station, hotel or other public area.
HY-LAND P7S (=P7 and SWING MODULE):
- Two play towers connected by a wide open living area, gable roofs (wood)
- Climb the tower: two ladders and three climbing walls
- Two sandboxes with equipment under the play tower (plinth)
- Slide Hy-Slide (green plastic, length 3 m)
- Swing module and it includes two swings with brackets
- Total height at the ridge of the roof: 4.0 m
- Sitting platform height: 1.5 m
- Product length: 11.4 m
- Product width: 4.4 m
- Length of the safety area: 13.6 m
- Width of the safety area: 7.5 m
- Total area of the security area: 117 m2
- Users at a time maximum: 12 (children, 3-12 years)
- Indicative assembly time for two people: 22 hours
- The package includes ground anchors for a hard surface. If the product is attached to a soft surface, you need 7 packs of ground anchors available as accessories (14 anchors in total) and about 470 liters of concrete.
- The Hy-Land product does not require much maintenance, but its safety must be checked regularly. The package includes a logbook for recording inspections.
- The package includes the necessary lumber (ready-made components of the right size, pressure-saturated pine, posts 90x90mm, beams 45x70mm, boards 22x145 mm), installation instructions, the necessary fastening materials, plastic protective ends of the bolts, screwdriver tips and drill bits, cotton passport, powder-coated grab handles that belong to the tower, installation materials for the slide, name plate, ground anchors for a hard surface, log book for safety inspections, litter box base, cat net for the litter box - and depending on the configuration, also the steps of the ladder and the climbing wall's Climbing Clips, and the swing stand's two swings with chains and fasteners.
Hy-Land playgrounds are carefully designed to guarantee the best possible safety. All Hy-Land playground products have received type approval according to the European EN 1176 standard from the German TÜV Rheinland inspection institute. In order to manage periodic inspections and maintenance, a record must be kept of all events. Playgrounds must be built on a shock-absorbing base in accordance with the European EN 1176 standard. One option for the base is the optional rubber plates.
The product contains wood, which is a natural material. The characteristics and appearance of the wood change according to the weather conditions.
Durability and appearance can be affected by oils and paints intended for the exterior treatment of wood.
There is more information on the matter in the PDF appendix
